Hilux — Stage 1 ECU Tune
- Power increase of 26%
- Torque increase of 33% with 100Nm additional output
- Improved fuel efficiency for commercial use
- Enhanced heavy load towing capability
- Optimized boost control
The 2013 1KD Hilux is a workhorse platform that responds well to measured recalibration. This Stage 1 file lifts power from 66.7 kW to 84 kW at the wheels, with torque climbing from 234.6 Nm to 312 Nm. All achieved on the factory ECU with no hardware changes required.
The file adjusts boost control, wastegate solenoid duty, high-pressure fuel pump delivery, and injector timing to make the most of what's already there. It's aimed at the operator who wants better driveability and towing capacity without fitting aftermarket parts. The workshop recorded these figures on their dyno after multiple runs to verify consistency.
Suits touring rigs and daily drivers where reliability and factory emissions equipment matter. The gains sit comfortably within the mechanical limits of the factory turbo and fuel system.
Does this require any hardware changes?
No. This is a software-only Stage 1 tune calibrated for the factory ECU and all standard hardware.
What's the torque increase like for towing?
Torque lifts from 234.6 Nm to 312 Nm at the wheels, which makes a noticeable difference when loaded or climbing grades.
Is this safe on the factory turbo and fuel system?
Yes. The file stays within the safe operating envelope of the standard turbo, injectors, and high-pressure fuel pump.
Workshop & Dealer Access
Protunes supplies ECU calibration files exclusively to approved workshops, tuners, and dealers throughout Australia. Platform: Factory.
Apply for Workshop Access