Ford Tourneo Connect ECU & TCU Tuning Files
Custom Ford Tourneo Connect calibration files for approved Australian workshops — typically around +45 hp and +90 Nm. Built from your stock read and data logs, for off-road and competition use.
Ford Tourneo Connect — Engine Variants & Typical Gains
Every Ford Tourneo Connect file is developed from the vehicle's own stock read and your declared hardware, then refined against your data logs using PCMTec, HP Tuners.
| Engine variant | Power (stock → tuned) | Torque (stock → tuned) |
|---|---|---|
| 1.6T EcoBoost 150hp | 150 → 195 hp | 240 → 330 Nm |
| 1.5 Ecoblue 120hp | 119 → 164 hp | 270 → 360 Nm |
| 1.5 TDCi 120hp | 119 → 164 hp | 230 → 320 Nm |
| 1.6 TDCi 115hp | 115 → 160 hp | 285 → 375 Nm |
| 1.5 Ecoblue 100hp | 101 → 146 hp | 250 → 340 Nm |
| 1.0 EcoBoost 100hp | 101 → 146 hp | 170 → 260 Nm |
| 1.5 TDCi 100hp | 101 → 146 hp | 230 → 320 Nm |
| 1.6 TDCi 95hp | 95 → 140 hp | 230 → 320 Nm |
Tuned figures are typical estimates from this model's gains; actual results depend on variant, fuel and supporting hardware, and are verified from your logs.
Dyno-Verified Ford Results
Before-and-after results from real Ford calibrations in the tune archive.
Ford Tourneo Connect Tuning Files — Common Questions
How much power can a Ford Tourneo Connect gain from tuning?
Typical gains for the Ford Tourneo Connect are around +45 hp and +90 Nm, developed from the stock read and verified against your data logs. Exact figures depend on the variant, fuel and supporting hardware.
Are Ford Tourneo Connect tuning files custom?
Yes — every Ford file is built for the specific vehicle and its declared hardware using PCMTec, HP Tuners, then refined from your logged data. We do not supply generic, off-the-shelf maps.
Do you supply Ford Tourneo Connect files Australia-wide?
Yes. Ford ECU and TCU files are delivered remotely through the dealer portal to approved workshops in every Australian state and territory, for off-road and competition use.
Tuning a Ford Tourneo Connect?
Register your workshop to upload the stock read and have the calibration developed and revised around your data.
