Ford Transit Connect ECU & TCU Tuning Files
Custom Ford Transit Connect calibration files for approved Australian workshops — typically around +73 hp and +110 Nm. Built from your stock read and data logs, for off-road and competition use.
Ford Transit Connect — Engine Variants & Typical Gains
Every Ford Transit Connect file is developed from the vehicle's own stock read and your declared hardware, then refined against your data logs using PCMTec, HP Tuners.
| Engine variant | Power (stock → tuned) | Torque (stock → tuned) |
|---|---|---|
| 2.5i Duractec 169hp | 169 → 242 hp | 231 → 341 Nm |
| 1.6 EcoBoost 150hp | 150 → 223 hp | 240 → 350 Nm |
| 1.5T Ecoboost 150hp | 150 → 223 hp | — |
| 2.0 Ecoblue 122hp | 122 → 195 hp | 320 → 430 Nm |
| 1.5 TDCi 120hp | 119 → 192 hp | 270 → 380 Nm |
| 1.5 Ecoblue 120hp | 119 → 192 hp | 270 → 380 Nm |
| 1.6 TDCi 115hp | 115 → 188 hp | 270 → 380 Nm |
| 1.8 TDCi 110hp | 110 → 183 hp | 280 → 390 Nm |
Tuned figures are typical estimates from this model's gains; actual results depend on variant, fuel and supporting hardware, and are verified from your logs.
Dyno-Verified Ford Results
Before-and-after results from real Ford calibrations in the tune archive.
Ford Transit Connect Tuning Files — Common Questions
How much power can a Ford Transit Connect gain from tuning?
Typical gains for the Ford Transit Connect are around +73 hp and +110 Nm, developed from the stock read and verified against your data logs. Exact figures depend on the variant, fuel and supporting hardware.
Are Ford Transit Connect tuning files custom?
Yes — every Ford file is built for the specific vehicle and its declared hardware using PCMTec, HP Tuners, then refined from your logged data. We do not supply generic, off-the-shelf maps.
Do you supply Ford Transit Connect files Australia-wide?
Yes. Ford ECU and TCU files are delivered remotely through the dealer portal to approved workshops in every Australian state and territory, for off-road and competition use.
Tuning a Ford Transit Connect?
Register your workshop to upload the stock read and have the calibration developed and revised around your data.
